WIDE BELT SANDERS
Hold : Motivity : GC |
|
|
|
The best value-for-money wide belt sanders that comes from a new generation factory established in China, using design and quality control from Europe and is suitable for sanding solid timber (not veneered panels). |
FEATURES:
1st Sanding Unit: -80 Shore rubber covered contact roller and rigid platen combination for fine finishing.
-15hp motor.
-Disc brake for emergancy stop.
|
630mm Maximum working width.
Electric rise and fall of feed conveyor table with key pad programmable automatic height setting using an electronic controller and digital readout.
Long 1900mm sanding belt for extended life.
Efficient dust extraction cowlings inside machine.
Heavy, accurate construction of machine.
Rotary bristle workpiece cleaning brush at rear.
Safety flap with limit switch at infeed position, to stop machine and lower the feed conveyor in an emergency. |
|
|
|
|
FEATURES:
1st Sanding Unit: -80 Shore rubber covered contact roller and rigid platen combination for fine finishing.
-20hp motor.
-Disc brake for emergancy stop.
|
1000mm Maximum working width.
Electric rise and fall of feed conveyor table with key pad programmable automatic height setting using an electronic controller and digital readout.
Long 2000mm sanding belt for extended life.
Efficient dust extraction cowlings inside machine.
Heavy, accurate construction of machine.
Rotary bristle workpiece cleaning brush at rear.
Safety flap with limit switch at infeed position, to stop machine and lower the feed conveyor in an emergency. |
|
|
|
|
FEATURES:
1st Sanding Unit: -80 Shore rubber covered contact roller and rigid platen combination for fine finishing.
-30hp motor.
-Disc brake for emergancy stop.
|
1300mm maximum working width.
Electric rise and fall of feed conveyor table with key pad programmable automatic height setting of the feed table using an electronic controller and digital readout.
Long 2200mm sanding belt for extended life.
Efficient dust extraction cowlings inside machine.
Heavy, accurate construction of machine.
Rotary bristle workpiece cleaning brush at rear.
Safety flap with limit switch at infeed position, to stop machine and lower the feed conveyor in an emergency. |
|
|
|
|
FEATURES:
1st Sanding Unit: -80 Shore rubber covered contact roller for accurate calibrating and sanding.
-15hp motor.
-Disc brake for emergancy stop.
2nd Sanding Unit:
-60 Shore rubber covered contact roller and rigid platen combination for fine finishing.
-10hp motor.
-Disc brake for emergancy stop.
|
630mm Maximum working width.
Electric rise and fall of feed conveyor table with key pad programmable automatic height setting using an electronic controller and digital readout.
Long 1900mm sanding belts for extended life.
Efficient dust extraction cowlings inside machine.
Heavy, accurate construction of machine.
Rotary bristle workpiece cleaning brush at rear.
Safety flap with limit switch at infeed position, to stop machine and lower the feed conveyor in an emergency. |
|
|
|
|
FEATURES:
1st Sanding Unit: -80 Shore rubber covered contact roller for accurate calibrating and sanding.
-25hp motor.
-Disc brake for emergancy stop.
2nd Sanding Unit:
-60 Shore rubber covered contact roller and rigid platen combination for fine finishing.
-15hp motor.
-Disc brake for emergancy stop.
|
1000mm maximum working width.
Electric rise and fall of work table with programmable automatic height setting of the feed table using an electronic controller and digital readout.
Long 1900mm sanding belts for extended life.
Efficient dust extraction cowlings inside machine.
Variable speed feed drive 6 to 30 m/min.
Rotary bristle workpiece cleaning brush at rear.
Safety flap with limit switch at infeed position, to stop machine and lower the feed conveyor in an emergency. |
|
|
|
|
FEATURES:
1st Sanding Unit: -80 Shore rubber covered contact roller for accurate calibrating and sanding.
-30hp motor.
-Disc brake for emergancy stop.
2nd Sanding Unit:
-60 Shore rubber covered contact roller and rigid platen combination for fine finishing.
-20hp motor.
-Disc brake for emergancy stop.
|
1300mm maximum working width.
Electric rise and fall of work table with programmable automatic height setting of the feed table using an electronic controller and digital readout.
Long 2200mm sanding belts for extended life.
Efficient dust extraction cowlings inside machine.
Variable speed feed drive 6 to 30 m/min.
Rotary bristle workpiece cleaning brush at rear.
Safety flap with limit switch at infeed position, to stop machine and lower the feed conveyor in an emergency. |
|
| |
MOTIVITY WIDE BELT SANDERS
To Sand Veneered Panels |
|
|
|
FEATURES:
1st Sanding Unit: -80 Shore rubber covered contact roller for accurate calibrating and sanding.
-20hp motor.
2nd Sanding Unit:
-60 Shore rubber covered contact roller and electronically timed platen combination for fine finishing.
-15hp motor.
|
High precision control of sanding belt positioning by PLC, operated by electronic touch screen on front.
Electric rise and fall of work table with digital readout of table height setting.
Automatic panel thickness measuring device to set table at correct working height for the panel to be sanded.
Long 2200mm sanding belts for extended life.
Work table extended front and rear with table rollers.
Superior design dust extraction cowlings inside machine.
Oscillating blower to cool and clean second sanding belt.
Variable speed feed drive with Italian rubber feed conveyor.
Taiwanese ‘DELTA’ brand PLC and touch screen for reliability. |
|
|
|
|
FEATURES:
1st Sanding Unit: -80 Shore rubber covered contact roller for accurate calibrating and sanding.
-20hp motor.
2nd Sanding Unit:
-60 Shore rubber covered contact roller and electronically timed platen combination for fine finishing.
-15hp motor.
|
High precision control of sanding belt positioning by PLC, operated by electronic touch screen on front.
Electric rise and fall of work table with digital readout of table height setting.
Automatic panel thickness measuring device to set table at correct working height for the panel to be sanded.
Long 2200mm sanding belts for extended life.
Work table extended front and rear with table rollers.
Superior design dust extraction cowlings inside machine.
Oscillating blower to cool and clean second sanding belt.
Variable speed feed drive with Italian rubber feed conveyor.
Taiwanese ‘DELTA’ brand PLC and touch screen for reliability. |
|
|
|
|
FEATURES:
1st Sanding Unit: -80 Shore rubber covered 240mm diameter roller for accurate calibrating and sanding.
-30hp motor.
2nd Sanding Unit:
-60 Shore rubber covered 210mm diameter roller and electronically timed platen combination for fine finishing.
-25hp motor.
|
High precision control of sanding belt positioning by PLC, operated by electronic touch screen on front.
Electric rise and fall of work table with digital readout of table height setting.
Automatic panel thickness measuring device to set table at correct working height for the panel to be sanded.
Consumption of compressed air 1.5 cubic metres/hour.
Very long 2500mm sanding belts for extended life.
Work table extended front and rear with table rollers.
Superior design dust extraction cowlings inside machine.
Oscillating blower to cool and clean second sanding belt.
Variable speed feed drive with Italian rubber feed conveyor.
Taiwanese ‘Delta’ brand PLC and touch screen for reliability.
|
|
| |
GC WIDE BELT SANDERS
For Lacquer and Sanding Vennered Panels |
|
|
|
FEATURES:
Sanding Unit:
Sanding Belt Unit
Large 185mm diameter, 30 shore contact roller with variable speed by inverter – motor 10hp.
Disc brake on sanding belt for quick stopping in emergency.
Optronic (electric eye) control of sanding belt oscillation.
Pneumatic tensioning of sanding belt with safety limit switch.
Sanding belt cleaning air jet device oscillating back and forth.
Pressure shoes each side of contact roller to control top surface of panels.
|
Work Table
Floating work table with 1/2hp electric rise and fall.
Panel thickness measuring type table height setting device.
Safety stop bar on front of work table.
Fully variable feed speed – 4 to 16 metres/minute.
Feed motor – 2hp driving speed variator.
Automatic pneumatic feed belt tracking.
General Equipment
Heavy steel construction of rigid machine body and frame.
Electrical control panel on front of machine convenient to operator’s position.
Overload protection on all motors.
Automatic star-delta switch on main motor.
Amp meter to check load on main motor.
Air regulator, oiler and filter unit fitted.
Rotary bristle brush on rear to clean panel surface. |
|
|
|
|
FEATURES:
Sanding Unit:
Sanding Belt Unit
Large 185mm diameter, 30 shore contact roller with variable speed by inverter – motor 10hp.
Disc brake on sanding belt for quick stopping in emergency.
Optronic (electric eye) control of sanding belt oscillation.
Pneumatic tensioning of sanding belt with safety limit switch.
Sanding belt cleaning air jet device oscillating back and forth.
Pressure shoes each side of contact roller to control top surface of panels.
|
Work Table
Floating work table with 1/2hp electric rise and fall.
Panel thickness measuring type table height setting device.
Safety stop bar on front of work table.
Fully variable feed speed – 4 to 16 metres/minute.
Feed motor – 2hp driving speed variator.
Automatic pneumatic feed belt tracking.
General Equipment
Heavy steel construction of rigid machine body and frame.
Electrical control panel on front of machine convenient to operator’s position.
Overload protection on all motors.
Automatic star-delta switch on main motor.
Amp meter to check load on main motor.
Air regulator, oiler and filter unit fitted.
Rotary bristle brush on rear to clean panel surface. |
|
|
|
|
FEATURES:
Sanding Unit:
Sanding Belt Unit
Large 185mm diameter, 30 shore contact roller with variable speed by inverter – motor 15hp.
Disc brake on sanding belt for quick stopping in emergency.
Optronic (electric eye) control of sanding belt oscillation.
Pneumatic tensioning of sanding belt with safety limit switch.
Sanding belt cleaning air jet device oscillating back and forth.
Pressure shoes each side of contact roller to control top surface of panels.
|
Work Table
Floating work table with 1/2hp electric rise and fall.
Panel thickness measuring type table height setting device.
Safety stop bar on front of work table.
Fully variable feed speed – 4 to 16 metres/minute.
Feed motor – 2hp driving speed variator.
Automatic pneumatic feed belt tracking.
General Equipment
Heavy steel construction of rigid machine body and frame.
Electrical control panel on front of machine convenient to operator’s position.
Overload protection on all motors.
Automatic star-delta switch on main motor.
Amp meter to check load on main motor.
Air regulator, oiler and filter unit fitted.
Rotary bristle brush on rear to clean panel surface. |
|
|
