1
1
Quality Woodworking Machinery including •Clamps, Clamping Racks, Multi Rotating Clamping Systems •Glue Applicators •Band Saws •Multi Bores •Thicknessers and Planers •Dust Extractors •Edge Banders •Panel Saw, Rip Saws and Docking Saws •Titebond Glue •And Much More........
Awisa 2008
STAND 4227 - 4231
THICKNESSERS
MODEL WT-680 POWER FED THICKNESSING PLANER

Features:
381mm (15”) maximum working width.
165mm (6.5”) maximum working height.
Driven serrated steel infeed roller in front of cutterhead.
Driven smooth outfeed roller behind cutterhead with rubber surface.
Anti-kick back device at infeed position.
Two idle rollers in ground cast iron work table, directly below two driven feed rollers above.
Two support rollers on front of work table and two at rear.
Handwheel rise and fall of top section of machine on four round threaded columns, driven by chain below work table.
Locking knob to hold table at required height.
Measurement scale and pointer to set table height.
Dust extraction chute on rear of machine of 100mm diameter.
Push button switch with protruding stop button.
 
MODEL MB-508L POWER FED THICKNESSING PLANER

FEATURES:
508mm (20”) maximum working width.
200mm (8”) maximum working height.
Driven serrated infeed roller in front of cutterhead.
Driven smooth outfeed roller behind cutterhead.
Anti-kick back device at infeed position.
Two idle rollers in ground cast iron work table, directly below two driven feed rollers above.
Two idle rollers on top of machine to allow easy return of timber to operator.
Cast iron extensions in front and at rear of work table.
Handwheel rise and fall of work table through four round threaded columns, driven by chain below work table.
Rubber sleeves on all four columns to eliminate dust.
Locking knob to hold table at required height.
Measurement scale and pointer to set table height.
Dust extraction chute on rear of machine of 127mm diameter.
Magnetic push button switch with overload protection.
Three rollers beneath machine for mobility.
 
MODEL CT-508G HEAVY DUTY THICKNESSER
Features:
508mm (20”) maximum working width.
Sectional driven serrated infeed roller in front of cutterhead.
Driven smooth outfeed roller behind cutterhead.
Heavy duty anti-kick back device at infeed position.
Two adjustable idle rollers in ground cast iron work table, directly below two driven feed rollers above.
Handwheel rise and fall of work table through two threaded columns.  Handwheel can be locked by central locking knob.
Machined slideways on all four corners of machine body, for precision guidance of table rise and fall.
Measurement scale and pointer to set table height.
Access panels on sides of machine for easy servicing.
Dust chute with 127mm (5”) diameter outlet.
 
MODEL WJ-24 POWER FED HEAVY DUTY THICKNESSER

Features:
609mm maximum working width.
177mm maximum working height.
Cast iron construction on steel base.
Rigid work table mounted on two rise and fall screws.
Slideways with adjustable gibs on all four corners of work table to ensure stability.
Manual rise and fall of work table by handwheel on table.
Serrated steel infeed roller and sectional top pressures.
Smooth steel driven outfeed roller.
Idle rollers in work table below driven top rollers.
Anti-kickback device to protect operator.
 
MODEL P-630 HEAVY DUTY THICKNESSING PLANER

Features:
630mm (24”) maximum working width.
300mm (12”) maximum working height.
Heavy duty cast iron construction.
Rigid work table mounted on four rise and fall screws.
Electric rise and fall of work table by 0.5hp motor.
Sectional infeed roller and top pressures.
Two smooth driven outfeed rollers.
Two height adjustable idle rollers in work table directly below top driven rollers.
Anti-kickback device to protect operator.
Variable feed speed driven by 2hp motor.
 
SYSTEM MODEL MUW-610 MILLING TYPE POWER FED THICKNESSER ESPECIALLY FOR DIFFICULT TIMBER TO AVOID TEAR-OUT ON CURLY GRAIN SECTIONS

Features:
610mm maximum working width.
6mm to 150mm working height range.
Machining done by two large diameter horizontal disc type milling heads.
Disposable turn-over tungsten tips in milling heads.
Heavy duty steel and cast iron construction.
Fixed height work table with feed conveyor belt as on wide belt sanders.
Top section of machine rises and falls electrically on four heavy duty screws to adjust cutting thickness.
Variable feed speed from 5 to 15 metres/min.
Milling head motor mounted vertically above machine.
Twin 100mm dust exhaust outlets on each side of machine.
Emergency stop switch on front of machine.
Full electrical control panel on left side of machine.
 
SYSTEM MODEL MUW-1300 MILLING TYPE POWER FED THICKNESSER ESPECIALLY FOR DIFFICULT TIMBER TO AVOID TEAR-OUT ON CURLY GRAIN SECTIONS
Features:
1300mm maximum working width.
6mm to 150mm working height range.
Machining done by four large diameter horizontal disc type milling heads.
Disposable turn-over tungsten tips in milling heads.
Heavy duty steel and cast iron construction.
Fixed height work table with feed conveyor belt as on wide belt sanders.
Top section of machine rises and falls electrically on four heavy duty screws to adjust cutting thickness.
Variable feed speed from 5 to 15 metres/min.
Milling head motors mounted vertically above machine.
Twin 100mm dust exhaust outlets on each side of machine.
Emergency stop switch on front of machine.
Full electrical control panel on left side of machine.
 
Disclaimer:
 Weldline Engineering Pty Ltd maintains a constant program of product research and development and retains the right to change specifications without notice.  It is recommended that the prospective purchaser ensure that this web site correctly identifies the products described herein. 
©2008 Weldline
Telephone Number: +61 8 8280 6441
Site Designed by: Costa Designs