FEATURES:
9” Diameter sanding disc and 6” x 48” sanding belt.
3/4hp Single phase motor with v-belt drive.
Tilting work table with mitre gauge for belt or disc.
Cast iron machine with sheet steel floor stand.
Superior Taiwanese model – accurate and smooth running.
Push button on/off switches.
Click here for Product Data Sheet on the SBD-6009Q.(PDF 101kb)

FEATURES:
152mm (6”) wide x 1220mm (48”) long sanding belt.
305mm (12”) diameter sanding disc.
1.5hp 3 phase or single phase motor.
Dust exhaust connection chutes on both belt & disc.
Tilting cast iron work tables on both belt & disc.
Fully enclosed, cabinet style floor stand.
Magnetic switch box with mushroom head emergency stop button and a second emergency stop on the disc side.
Click here for Product Data Sheet on the SBD-6012Q.(PDF 95kb)

FEATURES:
Sanding belt tilts to 90° to work vertically or horizontally.
Single phase 0.75hp motor with on/off switch.
Aluminium work table 440mm long x 254mm wide.
Stable open leg fabricated steel floor stand.
End sup[port table included for curved sanding.
Dust exhaust outlet at motor end of machine.
Click here for Product Data Sheet on the BOY-6X48.(PDF 107kb)

FEATURES:
Single phase or three phase 1.5hp motor with push button switches.
Complete sanding belt assembly tilts 90 degrees to work either horizontally or vertically as an edge sander, or at any angle in between.
Cast iron work table with angle gauge sliding in a dovetail slot.
Fabricated sheet steel floor stand with wide base for good support.
Lever action quick tensioning of sanding belt.
Simple belt tracking adjustment to keep belt running on pulleys.
Cast iron work stop mounted across sanding belt.
Dust extraction take-off on motor end of sanding belt.
Cast iron support table on opposite end for curved work sanding.
Click here for Product Data Sheet on the BIG BOY-80.(PDF 109kb)

FEATURES:
Single phase 0.25hp motor with on/off switch.
Four pole motor to work at sanding speed of 1440rpm.
Six bobbins included from 12.7mm to 75mm diameter.
Bobbins oscillate up and down to spread work load on sandpaper.
Bench model with white laminated board table.
Six metal table inserts to suit all six bobbins.
Six spindles moulded into machine body to store bobbins not being used.
Dust extraction port below work table.
Click here for Product Data Sheet on the MM-16.(PDF 98kb)

FEATURES:
Single phase 0.5hp motor with on/off switch.
Four pole motor to work at sanding speed of 1440rpm.
Cast iron work table of 370mm square, tilting 45º to front.
22mm, 38mm and 51mm diameter bobbins as standard equipment.
Bobbin oscillation stroke of 24mm to spread work load on sandpaper sleeve.
Dust extraction chute below work table.
Nett weight of machine – 30kgs.
Click here for Product Data Sheet on the MM-326.(PDF 104kb)

FEATURES:
0.5hp Single phase motor, 4 pole, 1440rpm.
Push button on/off switches with protruding red stop button.
Cast iron work table of 370mm square, tilting to 45° to front.
50mm (2”) diameter bobbin only as standard.
6mm, 12mm, 16mm and 38mm bobbins available as extras.
Bobbin oscillation stroke of 12mm to spread workload on sandpaper sleeve.
Four table insert plates to suit different bobbins.
Dust extraction chute below work table.
Nett weight of machine – 30kgs.
Click here for Product Data Sheet on the OVS-K.(PDF 99kb)

FEATURES:
Industrial version with heavy enclosed machine base.
1hp single or three phase motor with push button on/off switch.
Four pole motor to work at sanding speed of 1440rpm.
Cast iron work table 610mm square, tilting to 45º to front.
Bobbin oscillation stroke of 38mm to spread workload on sandpaper sleeves.
Oscillation stroke sliding inside oil bath (75 per minute) for best wear resistance and long service life.
Dust extraction chute of 4” diameter below work table.
Nett weight of machine – 137kgs.
Ten bobbins from 6mm to 100mm diameter included as standard.
Click here for Product Data Sheet on the OVS-JM.(PDF 101kb)

FEATURES:
Floor stand supporting 1hp single phase motor with long shafts both ends to take sanding heads.
Four pole motor with ideal sanding speed of 1440rpm.
Machine is designed to have workpieces held by operator against sanding heads to sand free shapes.
Two pneumatic bobbins included –
80mm diam x 230mm long
120mm diam x 230mm long
One brushed back sanding head included – 210 diam x 160mm long.
A very useful novelty sander for special shapes.
Click here for Product Data Sheet on the MMT-3125.(PDF 114kb)

FEATURES:
508mm (20”) diameter machined steel sanding disc.
2hp three phase motor with disc mounted on motor shaft.
Four pole motor for ideal sanding speed of 1440rpm.
Magnetic switchgear with overload protection, no-volt release, green start button and red mushroom head stop button.
Heavy cast iron base provides stability.
Rack and pinion rise and fall of work table, counterbalanced by a coil spring inside heavy support post.
Rack and pinion tilting of work table with clear angle scale.
Disc fully guarded below table, with 4” diameter dust outlet.
Wrap over top guard leaving only the work area exposed.
Click here for Product Data Sheet on the DS-20.(PDF 101kb)

FEATURES:
1hp Single phase motor with disc mounted directly on motor shaft.
Four pole motor for ideal sanding speed of 1440rpm.
Push button on/off switches with protruding red stop button.
Cast iron tilting work table with mitre gauge.
All standard equipment as shown on leaflet.
Bench model – no floor stand.
Click here for Product Data Sheet on the DS-12.(PDF 101kb)