Air volume capacity 2000cfm

Features:
200mm (8”) diameter main inlet to fan cowling.
Standard inlet adaptor with 1x5” and 2x4” inlets.
2hp either phase motor with switch, cord and plug.
Sheet steel construction of base and fan cowling.
Four strong castors on base for mobility.
Woven cotton filter bag to allow free travel of air while also collecting dust. Zipper on outer end of bag for easy emptying.
Motor on fan mounted low down on base of machine, to prevent unit tipping over when being moved.
Designed to fit under a bench or table to save space.
Click here for Product Data Sheet on the SF-002T.(PDF 109kb)

Air volume capacity 600cfm

Features:
100mm (4”) diameter inlet to fan cowling.
1hp Single phase motor with switch, cord and plug.
Sheet steel construction of base, fan cowling and bag drum.
Vertical circular steel post to support fan unit.
Four castors on base for easy mobility.
Woven cotton top filter bag to allow free travel of air.
Bottom collection bag of same material to assist air flow.
Click here for Product Data Sheet on the FM-230.(PDF 105kb)

Air volume capacity 1200cfm

Features:
125mm (5”) diameter main inlet to fan cowling.
Adaptor on inlet with 2 x 4” inlets.
2hp single phase motor with switch, cord and plug.
Sheet steel construction of base, cyclone and fan cowling.
Four strong wheel-type castors on base for mobility.
Woven cotton top filter bag to allow free travel of air.
Bottom collection bag of same material to assist air flow.
Motor on fan mounted low down on base of machine, to prevent unit tipping over when being moved.
Click here for Product Data Sheet on the FM-300.(PDF 107kb)

Air volume capacity 1600cfm

Features:
150mm (6”) diameter main inlet to fan cowling.
Adaptor on inlet with 5” & 3”, 5” & 4” or 3 x 4” inlets.
2hp single or three phase motor with switch, cord and plug.
Sheet steel construction of base, cyclone and fan cowling.
Four strong wheel-type castors on base for mobility.
Woven cotton top filter bag to allow free travel of air.
Bottom collection bag of same material to assist air flow.
Motor on fan mounted low down on base of machine, to prevent unit tipping over when being moved.
Click here for Product Data Sheet on the CT-106.(PDF 108kb)

Air volume capacity 1800cfm

Features:
152mm (6”) diameter main inlet to fan cowling.
Adaptor on inlet with 3 x 4” inlets.
2hp single phase or 3hp three phase motor with switch and cord and plug.
Sheet steel construction of base, cyclone, fan and fan cowling.
Four strong wheel-type castors on base for mobility.
Woven cotton top filter bags to allow free travel of air.
Bottom collection bags of same material to assist air flow.
Motor on fan mounted low down on base of machine, to prevent unit tipping over when being moved.
Click here for Product Data Sheet on the FM-300S.(PDF 113kb)

Air volume capacity 2800cfm

Features:
203mm (8”) diameter main inlet to fan cowling.
Adaptor on inlet with 5” & 2x4” inlets.
Single or three phase 3hp motor with switch and cord.
Sheet steel construction of base, cyclone, fan and fan cowling.
Four strong wheel-type castors on base for mobility.
Woven cotton top filter bags to allow free travel of air.
Bottom collection bags of same material to assist air flow.
Motor on fan mounted low down on base of machine, to prevent unit tipping over when being moved.
Click here for Product Data Sheet on the CT213.(PDF 129kb)

Air volume capacity 4500cfm

Features:
254mm (10”) diameter main inlet to fan cowling.
Adaptor on inlet with 4 x 5” diameter inlets.
7.5hp three phase motor with switch and cord.
Four strong wheel-type castors on base for mobility.
5 Micron polyester top filter bags to allow free travel of air.
Disposable bottom collection bags of clear plastic.
Body of machine can be mounted with inlet facing up or down to choice.
Click here for Product Data Sheet on the SF-005V.(PDF 102kb)

Air volume capacity 4900cfm

Features:
254mm (10”) diameter main inlet to fan cowling.
Adaptor on inlet with 6 x 4” diameter inlets.
10hp three phase motor with switch and cord.
Sheet steel construction of base, cyclone, fan and fan cowling.
Six strong wheel-type castors on base for mobility.
Four woven cotton top filter bags to allow free travel of air.
Four bottom collection bags of same material to assist air flow.
Motor on fan mounted below fan with inlet from top.
Click here for Product Data Sheet on the SF-004.(PDF 110kb)

Air volume capacity 6440cfm

Features:
New generation 'quiet series' extractor incorporating a very large fan at 1440rpm, instead of the usual 2880rpm.
Strong sheet metal construction – 200kgs nett weight.
Six tall top filter bags of 5 micron filter material.
Two bottom collection bags 600mm diameter – clear plastic disposable type bags.
Click here for Product Data Sheet on the SF-060.(PDF 99kb)

Air volume capacity 8518cfm

Features:
New generation 'quiet series' extractor incorporating a very large fan at 1440rpm, instead of the usual 2880rpm.
Strong sheet metal construction – 250kgs nett weight.
Eight tall top filter bags of 5 micron filter material.
Three bottom collection bags 600mm diameter – clear plastic disposable type bags.
Click here for Product Data Sheet on the SF-070.(PDF 101kb)

Air volume capacity 8518cfm

Features:
New generation quiet series extractor incorporating a very large fan at 1440rpm, instead of the usual 2880rpm.
Strong sheet metal construction – 250kgs nett weight.
Three 600mm diameter cartridge filters on top.
Three bottom collection bags 600mm diameter – clear disposable type bags.
Click here for Product Data Sheet on the SF-070CF.(PDF 122kb)

Air volume capacity 12,496cfm

Features:
New generation ‘quiet series’ extractor incorporating a very large fan at 1440rpm, instead of the usual 2880rpm.
Strong sheet metal construction – 300kgs nett weight.
Twelve tall top filter bags of 5 micron filter material.
Four bottom collection bags 600mm diameter – clear plastic disposable type bags.
Click here for Product Data Sheet on the SF-080.(PDF 105kb)

Air volume capacity 2000cfm

Features:
203mm (8”) diameter main inlet to cyclone.
Adaptor on inlet with 3x4” (102mm) diameter inlets.
3hp Three phase motor with magnetic switch.
Sheet steel construction of cyclone and fan cowling.
Tube steel frames supporting cyclone and bag unit.
Heavier shavings, chips and dust collected below cyclone in waste drum.(A 44 gallon drum is included with the unit.)
Fine particles only go through fan into bag unit.
Click here for Product Data Sheet on the CT-23SDC.(PDF 106kb)

Air volume capacity 2500cfm

Features:
254mm (10”) diameter main inlet to cyclone.
Adaptor on inlet with 4x4” (102mm) diameter inlets.
5hp Three phase motor with magnetic switch.
Sheet steel construction of cyclone and fan cowling.
Tube steel frames supporting cyclone and bag unit.
Heavier shavings, chips and dust collected below cyclone in waste drum. (A 44 gallon drum is included with the unit.)
Fine particles only go through fan into bag unit.
Click here for Product Data Sheet on the CT-25SDC.(PDF 105kb)

Air volume capacity 5000cfm

Features:
330mm (13”) diameter main inlet to cyclone.
Adaptor on inlet with 5x4” (102mm) diameter inlets.
10hp Three phase motor with magnetic switch.
Sheet steel construction of cyclone and fan cowling.
Tube steel frames supporting cyclone and two bag units.
Heavier shavings, chips and dust collected in two waste drums below cyclone. (Two 44 gallon drums are included with the unit.)
Fine particles only go through fan into bag unit.
Click here for Product Data Sheet on the CT-210SDC.(PDF 105kb)

Air volume capacity 1600cfm

Features:
Ideal for supporting workpieces while they are being sanded.
Dust is immediately drawn down into the table interior, rather than floating up into operator’s face.
By collecting dust at its source, far less dust is floating in the air inside the workshop.
Strong sheet steel construction, with three fold-down rear and inside flaps.
Rubber grommets around table air holes to support workpieces being processed.
On/off switch, cord and 3 pin plug provided.
Click here for Product Data Sheet on the DT-1000.(PDF 100kb)

Features:
Multiple pleats of polyester material in a circle, contained in a metal mesh cylinder.
Approximately seven times the filter area of a similar size bag.
One handle to be swept back and forth to clean all 360º of pleats inside cartridge by six rubber paddles.
Rubber seals on bottom edge, seal against dust extractor drum.
Click here for Product Data Sheet on the CK-500T.(PDF 109kb)

Features:
Multiple pleats of polyester material in a circle, contained in a metal mesh cylinder.
Approximately seven times the filter area of a similar size bag.
One handle to be swept back and forth to clean all 360º of pleats inside cartridge by six rubber paddles.
Rubber seals on bottom edge, seal against dust extractor drum.
Click here for Product Data Sheet on the CK-500T.(PDF 109kb)

Premium quality 2 denier spunbonded polyester fibre used in the Ultra fine pleated air filter cartridge is suitable for dry filtration of exhaust air from sanding and general wood working extraction machines, as well as many other applications.
Highly efficient in handling MDF sanding dust, plastics residue, metal filings, cloth fibres and most dry solid particle matter.
Available in 500mm diameter and 600mm diameter.
Click here for Product Data Sheet on the FILTERS.(PDF 123kb)