| DOCKING SAWS AND RADIAL ARM SAWS |
Docking Saws |
|
FEATURES:
Available in either right or left hand configuration to suit work flow.
455mm (18”) diameter saw blade, travelling up vertically to cut timber, from rest position below work table.
Cast iron work table on fabricated steel base.
Heavy moving safety guard to strongly clamp the timber to be cut by pneumatic pressure.
Overhead safety guards 300mm on each side of saw blade.
Two push button switches on front of machine to commence operation.
Hinged door on front of machine for easy access to working parts.
TCT saw blade included, with 120 teeth.
A well finished, fast and reliable docking saw.
Click here for Product Data Sheet on the YFC-18.(PDF 118kb)
|
|
Features:
Available in either left or right hand configuration to suit work flow.
600mm (24”) diameter TCT saw blade, travelling up vertically to cut timber from rest position below work table.
Cast iron work table on fabricated steel machine cabinet.
Heavy safety guard to strongly clamp the timber to be cut.
Switch panel on front of machine for convenience.
Operation of machine activated by two push buttons, which must both be pressed within 0.5 seconds of one another.
Hinged door on front of machine for easy access to working parts.
TCT saw blade included – 600mm x 120 teeth. A well finished, fast and reliable heavy duty docking saw.
OPTIONAL
Infeed Roller Table – 3 metres long with 10 rollers.
Outfeed Roller Table – 3 metres long with 10 rollers, aluminium fence, 3 flip-over work stops and metric measuring tape.
Click here for Product Data Sheet on the YFC-24.(PDF 108kb) |
|
|
Features:
PLC controlled automatic fence device driven by servomotor active as: STOP: just key in the size, it will automatically move to the position, ready for the job size.
Push FENCE: just key in the sizes and quantities, it will move to the length then push to the first size.
When the job is finished, it will keep going for the quantity or the next size entered and continue until all settings are finished, it will restart again.
Standard eight sets of job data memory.
Extendable: printer, PC link, and unlimited memory.
Efficiency and accuracy for all the jobs require sizing such boring, drilling and cutting.
Super traveling speed up to 200 feet per minute.
Within +-0.10mm accuracy.
Click here for Product Data Sheet on the P40X-5000.(PDF 111kb) |
| |
|
|
|
Features:
Heavy duty machine with ribbed cast iron arm.
Arm mounted on large vertical column for rigidity.
Pressed steel base and legs support column and work table.
Convenient handle on saw carriage with inbuilt switch.
Automatic saw carriage return spring device provided.
Replaceable steel runner bars inside arm, on which the eight carriage bearings run.
Three-way head movements allow a variety of options –
1.
Blade tilts down from vertical, 90 degree maximum, to horizontal position.
2. Head swivels around 90 degrees to allow ripping of timber.
3. Arm swivels around 45 degrees to left or right, to allow angles to be cut.
4. A combination of No.1 and No.3 allows compound angles to be cut.
Top half of TCT saw blade covered by metal safety guard.
Bottom half of blade protected by side guards that lift over workpieces (fully enclosed on left side).
Emergency stop, mushroom head switch on front of machine under table.
Click here for Product Data Sheet on the RS-420.(PDF 108kb)
|
|
|
|
|
