|
|
|
|
STAND 4227 - 4231 |
| BAND RESAWS |
|
Features:
800mm (32”) diameter cast iron wheels without rubber on rims.
Ground finish cast iron work table – tilts to 45º.
Heavy gauge fabricated steel body to minimize vibration.
Top and bottom precision saw guides to accept up to 100mm (4”) wide saw blades.
Rack and pinion rise and fall of top saw guides.
Top wheel up and down adjustment by handwheel.
Brush oil drip unit to clean bottom wheel rim.
Heavy adjustable rip fence to left of blade with idle rollers for friction free feeding.
Equipped with Model HF-150A serrated vertical-roller power feed unit for continuous feeding of timber.
One saw blade provided – 5500mm x 100mm x 19 gauge swaged tooth resaw blade.
Foot brake on bottom wheel for emergency stops.
Dust extraction outlet on side of machine 100mm diameter.
Transparent perspex eye protection guard over top guides.
Adjustable pneumatic side pressure of feed roller against timber.
Centralised electrical control panel with all switches grouped together.
Click here for Product Data Sheet on the HB-800.(PDF 118kb) |
|
|
FEATURES:
900mm (36”) diameter cast iron wheels without rubber on rims.
Large ground finish cast iron work table. Heavy gauge fabricated steel body to minimize vibration.
Top and bottom precision saw guides to accept up to 125mm (5”) wide saw blades.
Rack and pinion rise and fall of top saw guides.
Top wheel up and down adjustment by handwheel.
Brush oil drip unit to clean bottom wheel rim.
Heavy adjustable rip fence to left of blade with idle rollers for friction free feeding.
Integral heavy serrated vertical-roller power feed hob for continuous feeding of timber.
One saw blade provided – 5995mm x 125mm x 19 gauge swaged tooth resaw blade.
Foot brake on bottom wheel for emergency stops.
Two dust extraction outlets on machine each of 100mm diameter.
Adjustable pneumatic side pressure of feed roller against timber.
Automatic switch protruding from work table.
When depressed by incoming timber, it brings feed roller in, to make contact with timber, to feed it through to be cut.
Centralised electrical control panel with all switches grouped together.
Click here for Product Data Sheet on the HB-900HA.(PDF 118kb) |
|
|
Features:
600mm (24”) diameter cast iron wheels with rubber rims.
Electronic, automatic setting of saw blade unit height by digital keypad.
Heavy gauge fabricated steel body to minimize vibration.
Right and left side saw guides to accept up to 50mm wide saw blades.
Feed conveyor unit to feed workpieces through machine.
Separate feed motor controlled by inverter for variable feed speed.
Conveyor unit can be tilted for angle cutting of workpieces to 30º.
Two top pressure roller units to hold workpieces down on feed belt. Guide fence on right side of feed conveyor belt. Return conveyor rollers to return workpieces to operator.
Blade tensioning and tracking adjusted by two handwheels.
One saw blade provided – 4700mm x 25mm x 19 gauge. Dust extraction outlet on machine of 100mm diameter.
Centralised electrical control panel with all switches grouped together with keypad.
Full safety guarding of saw blade and wheel assemblies.
Click here for Product Data Sheet on the HBR-300.(PDF 119kb) |
|
|
| |
|
|
| |
|
Disclaimer: |
Weldline Engineering Pty Ltd maintains a constant program of product research and development and retains the right to change specifications without notice. It is recommended that the prospective purchaser ensure that this web site correctly identifies the products described herein. |
©2008 Weldline |
Telephone Number: +61 8 8280 6441 |
Site Designed by: Costa Designs |
| |
|
|
|
